| Accessories | ||
 |
T2 Bracket | Standard bracket for T2 and T2D taximeters. Allows use of meter to vehicle seals. |
| N00255 | ||
 |
T2 Dash Mounting Bracket - Reversible version | 'L' shaped bracket for fixing a T2 or T2D to a horizontal surface. Also requires use of standard bracket. |
| N00436 | ||
 |
T-Tiny dash mounting bracket | Bracket for fitting T-Tiny to a dash or roof. |
| N00347 | ||
 |
T-Tiny dash mounting bracket (Vent Mounting) | Bracket for fitting T-Tiny using a vent fixing |
| N00421 | ||
 |
Plastic Taximeter Mounting Bracket | Mounting bracket for use where meter to vehicle sealing is not required. Simple clip-in fixing. |
| N00309 | ||
 |
Vent Mounting Bracket for Taximeter | Simple accessory allows meter to be fitted to heating vents on some vehicles. |
| N00244 | ||
 |
Vent Mounting Bracket (Short Type) | Small version of the vent bracket for use with the T-Tiny |
| N00424 | ||
 |
T2 TXI Bracket | Bracket for fitting T2 and T2D into a London Taxis TXI or TXII vehicle. Also requires N00255. |
| N00320 | ||
 |
T2 Taximeter Saloon Harness (Wires and Sleeving version) | Standard wiring harness for general purpose installations of T2 and T2D taximeters. Cable length: 2 metres. The harness has connections for power (0v and 12v), speed pulse input and two lamp drive outputs. |
| N00278 | ||
 |
T2 Taximeter Saloon Harness (Multicore Cable Version) | Wiring harness (based on multicore cable) for general purpose installations of T2 and T2D taximeters. Cable length: 2 metres. The harness has connections for power (0v and 12v), speed pulse input and two lamp drive outputs. |
| N00431 | ||
 |
T-Tiny Taximeter Interface Harness | Special harness for installing the T-Tiny into a vehicle with an interface unit |
| N00413 | ||
 |
Serial Cable - Mini Receipt Printer | Cable for adapting a standard Aquila loom to work with the Mini Receipt Printer. |
| N00444 | ||
 |
Power Cable - Mini Receipt Printer | Power supply cable for the mini printer. |
| N00445 | ||
 |
T2 Saloon Harness with Printer (2.5m) | Wiring harness for installing a T2 and Thermal Receipt Printer. Taximeter cable length: 2 metres; Printer cable length: 2.5 metres. |
| N00319 | ||
 |
T2/TX1 Adaptor Harness | Adaptor for connecting a T2 to a London Taxis TXI or TXII vehicle. |
| N00298 | ||
 |
1.8m printer extension cable | Extends distance of printer from the meter by 1.8m. Also used to connect a printer to the T-Tiny interface module, N00398. |
| N00341 | ||
 |
T2/Printer/TXI Installation Harness | Wiring kit for installing a T2 with printer into a TX1 or TX2 taxi. |
| N00321 | ||
 |
450mm Printer Adaptor Lead for T2 | Pre-assembled RJ11 cable for adapting standard T2 harnesses for use with printer. |
| N00322 | ||
 |
Printer Mounting Plate | Mounting Plate for Thernal Printer. Fixes to printer with M3 screws. |
| N00323 | ||
 |
T2 Mk I Wiring Cover Spares Kit (Pack 10) | Replacement part for T2 and T2D Mk I taximeters' rear wiring cover. |
| N00290 | ||
 |
T2 Mk II Wiring Cover Spares Kit (Pack 10) | Replacement part for T2 and T2D Mk I taximeters' rear wiring cover. |
| N00386 | ||
 |
Box of 20 Printer Paper Rolls | 20 rolls of thermal paper for our Receipt Printer N00301. |
| N00327 | ||
 |
T-Tiny Interface Unit | Interface unit for the T-Tiny. Expands the T-Tiny's lamp outputs to 4 high current outputs and provides a connection for a printer. |
N00327 |
||
These pages contain a guide
to the range of products and accessories available from Aquila Electronics
Limited. For full details and pricing, please contact us directly. Products
are subject to availability and specifications are subject to change.